Rainwater harvesting catches runoff from roofs, slopes, roads and streams to store it or soak it into the ground, one of the cheapest ways to make rain-fed farming more secure. This guide covers the six kinds of water harvesting, farm ponds, check dams, percolation tanks, village tanks, sand dams and traditional systems, the five design steps with a worked farm-pond sum (SCS curve number) and a rooftop-tank sum, keeping water safe to drink, cutting seepage, evaporation and silt, ridge-to-valley watershed management, the rational method for peak runoff, and participatory watershed development with examples from China, India and Ethiopia.
In many dry regions, the problem is not only how little rain falls.
It is how much of it runs away in a few intense storms, leaving crops and people short of water for the rest of the year.
Rainwater harvesting collects that runoff, from roofs, slopes, roads or streams, and either stores it in tanks, ponds and reservoirs, or helps it soak into the soil and the aquifers below.
It is one of the oldest water technologies on Earth, from the cisterns and runoff farms of the ancient Negev to the village tanks of South Asia.
And it remains one of the cheapest ways to make rain-fed farming more secure. In this video: the kinds of water harvesting, the main structures, how to size a farm pond and a rooftop tank, how to keep the water you catch, and why the whole watershed, from ridge to valley, has to be managed together. The advice is general and global.
Local engineers and your extension service come first for any design.
Water harvesting comes in six broad kinds.
Rooftop harvesting leads water from roofs to tanks or cisterns, for drinking, livestock and kitchen gardens.
In-field harvesting holds rain where it falls, with contour ridges, tied ridges, planting pits,
half-moons and conservation tillage.
Micro-catchments send runoff from a small strip of land to the cropped area or tree basin right next to it.
Macro-catchments collect runoff from a larger area, such as a hillside or a road, and divert it to fields or store it in ponds and tanks.
Floodwater harvesting spreads seasonal floods from dry streambeds onto fields, as in the spate irrigation of Yemen, Pakistan and the Horn of Africa.
And groundwater recharge uses percolation ponds, recharge wells and check dams to raise the water table.
The structures you will see most often start with the farm pond:
a dug or embanked pond on one farm, storing runoff for a life-saving irrigation at a critical crop stage, and for livestock and fish.
Plastic or clay linings reduce seepage in permeable soils.
Check dams are small barriers across streams and gullies. They slow the flow, trap silt, and store water or let it soak in. Percolation tanks are shallow reservoirs on permeable ground, built to recharge wells downstream.
Village tanks are traditional reservoirs, such as the cascades of tanks in South India and Sri Lanka, many of them centuries old.
Sand dams, common in Kenya, are concrete walls across seasonal sandy rivers.
Sand builds up behind the wall, and water is stored inside the sand, protected from evaporation.
And there are many traditional systems, such as the khadin fields of Rajasthan, the tanka underground tanks of the Thar desert,
and the jessour of Tunisia.
Design follows five steps: estimate the runoff, work out the demand, size the storage allowing for losses and silt, design a safe inlet, silt trap and spillway, and plan the use and maintenance.
Here is the worked example from Laisha's explainer. A two-hectare cultivated catchment receives a design storm of eighty millimetres. Engineers estimate runoff with the curve number method, which rates how readily land sheds water: from about thirty for permeable, well-vegetated land, to over ninety for paved or compacted surfaces.
With a curve number of eighty, the first twelve point seven millimetres of rain soak in before any water runs off, and the storm produces about thirty-four point six millimetres of runoff. Over two hectares, that is about six hundred and ninety-two cubic metres of water.
If seepage and evaporation take thirty per cent before the water is needed,
about four hundred and eighty-four cubic metres are left. That is enough for one fifty-millimetre irrigation of one hectare at flowering.
In a dry spell, that single irrigation can save a crop.
Supplementary irrigation at critical stages can double yields in drought years.
Rooftop harvesting is even simpler to size.
Take a roof of one hundred square metres, in a place with six hundred millimetres of rain a year, and a runoff coefficient of zero point eight. The roof yields one hundred, times zero point six metres, times zero point eight: forty-eight cubic metres, or forty-eight thousand litres, a year.
A family using one hundred litres a day for drinking and cooking, through a six-month dry season, needs about eighteen thousand litres. So a tank of about eighteen to twenty cubic metres is enough, if the dry season begins with it full.
Is the water safe to drink?
Rooftop water stored in clean, covered tanks is often good. Keep debris and animals out, divert the first flush of each storm away from the tank, and treat or boil the water if it could be contaminated.
Many ponds dry up long before the crop needs them. The two culprits are seepage through permeable soil and evaporation in hot weather, which can be very high from shallow open ponds.
Line the pond or compact its floor, make it deeper rather than wider to reduce the surface area, and use shade or covers where you can.
Silt is the other enemy.
Without treatment of the catchment above, sediment shortens the life of ponds and dams.
A silt trap at the inlet keeps it out, and a spillway protects the embankment in a big storm.
Plan regular desilting and embankment repairs, because maintenance is often neglected once a structure is built. Manage water quality and mosquito breeding.
And remember your neighbours downstream: intensive harvesting upstream can reduce the flow to downstream users and reservoirs.
Rain does not respect field boundaries.
It runs off the upper slopes carrying soil, across the farms in the middle, into streams and down to the valleys.
Treating one field at a time cannot solve erosion, floods or falling groundwater.
The whole area that drains to a common point must be managed together. That area is a watershed, bounded by a ridge line.
Watersheds nest inside each other, from river basins down to micro-watersheds of a few hundred hectares, the usual unit for community planning.
Treatment is planned from the ridge down to the valley. On the upper slopes and ridges: trees, grass and shrub cover, contour trenches, and closing land to grazing so vegetation recovers.
On the middle slopes and cropland: contour bunds, terraces, contour cultivation, strip cropping, agroforestry and conservation agriculture.
And in the drainage lines and valleys: gully plugs, check dams, percolation tanks and farm ponds.
Why start at the top?
Water and soil move downhill.
Slowing runoff at the top keeps it from gathering speed and volume, which protects the structures and fields below.
Building check dams first, with no treatment upstream, often leaves them full of silt.
The numbers show it.
Engineers size a spillway from the peak runoff rate, using the rational method: runoff coefficient, times rainfall intensity, times area, divided by three hundred and sixty.
Take a fifty-hectare micro-watershed of cultivated land with a coefficient of zero point four, and a design storm of sixty millimetres an hour. The peak flow is about three point three cubic metres per second. Revegetate and bund the upper slopes, so the coefficient falls to zero point two five, and the peak falls to about two point one: about thirty-seven per cent less.
Smaller peaks mean less erosion, smaller and cheaper structures downstream,
and more water soaking into the soil.
Early watershed programmes were often designed by engineers and built by government departments, with little local ownership,
and the structures were neglected once the project ended.
Experience led to participatory watershed development.
Communities form watershed committees, plan with technical staff, contribute labour or money, and maintain the assets.
They agree their own rules on grazing and tree cutting, sometimes called social fencing.
And programmes deliberately include landless households and women, through jobs, common land, livestock and small enterprises,
because landowners in the treated area usually gain the most.
The results can be large. On China's Loess Plateau, projects from nineteen ninety-four terraced slopes, planted vegetation and restricted grazing over large areas, reducing erosion and raising incomes.
Villages such as Ralegan Siddhi and Adgaon in Maharashtra,
India, were transformed by community watershed work, and inspired national programmes.
And Ethiopia has rehabilitated highland catchments through community programmes since the two thousands. Less runoff and better water in wells can appear within one or two rainy seasons.
Vegetation and soil take several years.
To recap.
Water harvesting catches runoff from roofs, slopes, roads and streams, to store it or to soak it into the ground. The structures range from farm ponds and check dams to percolation tanks, village tanks, sand dams and cisterns. Size storage for the demand plus losses: in the worked example, a two-hectare catchment fills a pond for one life-saving irrigation of a hectare, and a one-hundred-square-metre roof yields forty-eight thousand litres a year.
Line ponds, trap silt, build spillways and keep up maintenance.
And manage the whole watershed, from ridge to valley, with the community.
For the full explainers and our crop guides, visit laisha.ai. Thank you for watching.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
An AI operating system for agriculture: free guides, manuals and tools written for every country.