Nepal Engineering Council Registration Exam — Agricultural Engineering

Nepal · Nepal Engineering Council · licensing · secondary source

673practice questions written to this syllabus
27subjects

Format

Reported as 100 MCQs, 2 hours, 50% to pass — this format is unverified (search summary only).

Sections

Over the years

The 10-chapter syllabus was read from a mirror (https://media.edusanjal.com/u/agricultural-engineering-registration-examination-syllabus_compressed.pdf) because the NEC guideline pages load only with JavaScript. Per-chapter weights are not stated.

Official source: https://www.nec.gov.np/page/general-registration-exam-guidelines

Subjects this exam draws on

Engineering Mechanics (Statics & Dynamics)25 questionsStrength of Materials19 questionsSoil Science for Engineers5 questionsCrop Production & Protection for Engineers86 questionsFluid Mechanics & Open Channel Hydraulics6 questionsSoil Mechanics75 questionsElectrical Machines & Power Utilisation3 questionsBuilding Materials, Theory of Structures & Construction78 questionsEngineering Economics, Project & Business Management62 questionsFarm Power Sources16 questionsFarm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser27 questionsFarm Machinery & Equipment II — Plant Protection, Harvesting, Threshing15 questionsMechanics of Tillage & Traction (Soil Dynamics)9 questionsFarm Machinery Management & Economics11 questionsWatershed Hydrology13 questionsSoil & Water Conservation Engineering2 questionsWatershed Planning & Management17 questionsIrrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods)26 questionsSprinkler & Micro-Irrigation Systems45 questionsAgricultural Drainage Engineering10 questionsWater Resources Management, Floods & Canal Systems1 questionsFood & Dairy Engineering9 questionsStorage Engineering, Material Handling & Packaging6 questionsRenewable Energy Sources (Solar, Wind)14 questionsBio-energy Systems: Design & Applications32 questionsAgricultural Structures & Environmental Control22 questionsProtected Cultivation & Greenhouse Engineering39 questions

Five practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Two chains pull on a tree stump from one ring with forces of 6 kN and 4 kN; the angle between the chains is 120 degrees. What is the magnitude of the resultant pull on the stump?

  1. 8.72 kN
  2. 7.21 kN
  3. 10.00 kN
  4. 5.29 kN
Answer and working

D. 5.29 kN

R = sqrt(P^2 + Q^2 + 2PQ cos theta) = sqrt(36 + 16 + 2 x 6 x 4 x cos 120) = sqrt(28) = 5.29 kN. Using +cos 60 instead of cos 120 gives 8.72 kN; treating the chains as perpendicular gives 7.21 kN; adding arithmetically gives 10 kN, which is only right for chains pulling in the same direction.

Engineering Mechanics (Statics & Dynamics) · Force systems and resultants

2. On the stress–strain curve of mild steel, the point beyond which the specimen no longer returns to its original length when unloaded is called the:

  1. Ultimate stress point
  2. Lower yield point
  3. Fracture point
  4. Elastic limit
Answer and working

D. Elastic limit

The elastic limit marks the end of fully recoverable deformation; loading past it leaves a permanent set. It lies just above the limit of proportionality. The yield points come later, where large plastic strain occurs at nearly constant load, and the ultimate stress is the peak of the engineering curve.

Strength of Materials · Stress, strain and Hooke's law

3. Loess is parent material deposited mainly by:

  1. Gravity on slopes
  2. Rivers in flood
  3. Glacier ice
  4. Wind
Answer and working

D. Wind

Loess is aeolian (wind-blown) silt. River deposits are alluvium, glacial deposits are till or outwash, and material moved downslope by gravity is colluvium.

Soil Science for Engineers · Soil formation and profile

4. In the South Asian cropping calendar, which group of crops is typically sown in October–November and harvested in March–April?

  1. Rabi crops such as wheat, chickpea and mustard
  2. Ratoon crops raised from the stubble of the previous crop
  3. Kharif crops such as rice, maize and cotton
  4. Zaid crops such as watermelon and summer mung bean
Answer and working

A. Rabi crops such as wheat, chickpea and mustard

Rabi crops are the post-monsoon winter crops: sown in October–November, harvested in March–April. Rice, maize and cotton are kharif (monsoon) crops; watermelon and summer mung bean are zaid crops of the irrigated summer gap; 'ratoon' describes regrowth from stubble, not a season.

Crop Production & Protection for Engineers · Crop classification and seasons

5. As the temperature rises, how do the viscosities of water and of air change?

  1. Both rise
  2. Water's viscosity falls; air's viscosity rises
  3. Both fall
  4. Water's viscosity rises; air's viscosity falls
Answer and working

B. Water's viscosity falls; air's viscosity rises

In liquids viscosity comes mainly from intermolecular cohesion, which weakens as temperature rises. In gases it comes from molecular momentum exchange, which increases with temperature. So the two trends are opposite.

Fluid Mechanics & Open Channel Hydraulics · Properties of fluids

Practise it, and prove it

These notes are free to read here, with no account.

What the Laisha app adds:

Free for ten days, then a subscription. We would rather write that here than have you find it later.

Open Laisha →