Across the six climate zones, 3 crops are sown or planted somewhere in August and 19 are harvested. The busiest zone is Temperate north, with 1 crops to sow and 13 to harvest. Mediterranean south and Tropical south have nothing to sow in the main calendar and are in planning months.
Sown in more than one zone: Potato (2 zones).
Harvested in more than one zone: Wheat (3 zones), Tomato (2 zones), Grape (2 zones), Maize (2 zones).
August's question: is the grain dry enough to store?
In August the small-grain harvest is in full swing across Europe, North America, Russia, Ukraine and northern China. After a season of work, a lot of the year's grain is lost or downgraded not in the field but in the store, and the cause is almost always moisture and heat.
Grain is alive. It breathes slowly, and moulds and insects in it breathe faster. Warm, damp grain heats up, which speeds moulds and insects further, until hot spots form and the grain spoils or cakes. The two levers are moisture and temperature. As a rule of thumb used in many extension guides, wheat and barley store safely for long periods at about 12 to 13 per cent moisture or below, and maize at about 13 to 14 per cent, while oilseeds such as canola and sunflower need much lower moisture, around 8 to 9 per cent or less, because their oil holds no water. The warmer the climate, the drier the grain must be.
Measure, do not guess. Moisture meters must be calibrated for the crop, and readings on hot grain straight from the combine can be misleading, so check again once it has cooled. Grain harvested wetter than the safe level must be dried or, for short periods, cooled with aeration fans; aeration does not dry grain much, but by pushing cool night air through it, it lowers temperature and slows spoilage.
Prepare the store before harvest: clean out old grain, dust and spillage where insects survive from last year, repair roofs and seals so rain cannot get in, and keep rodents out. Check stored grain every week or two at first, with a probe or temperature cable, for warm spots, crusting or a musty smell.
In South Asia and the Sahel, August is mid-monsoon, the main season for weeding, top-dressing and scouting kharif crops for pests such as fall armyworm in maize and sorghum, and for stem borers and planthoppers in rice. South of the equator it is late winter, with lambing and calving on many livestock farms and the first spring growth in pastures.
Maize· month 5 of about 6: walk your field twice a week. The cheapest pest control in the world is your own eyes and fingers.
Soybean· month 4 of about 5: pod fill: watch for pests and disease. Keep scouting through the pod-fill window, roughly R4 through R6, since this is when stink bugs, sudden death syndrome and Asian soybean rust do the most real damage, and act early rather than waiting for obvious symptoms.
Sugar beet· month 6 of about 7: know when to harvest. Judge real harvest timing by root size, leaf condition and your own local season length rather than a fixed date, since a root left too long or lifted too early both cost real money.
Cotton· month 5 of about 6: diseases, stage by stage. Cotton's own worst diseases are overwhelmingly soil-borne vascular wilts or whitefly-transmitted, and genetic resistance and clean, rotated land are this guide's strongest real defences against both.
Rice· month 5 of about 6: weeds and feeding. The first month decides everything. Pull weeds early, feed the crop if you can.
Maize (irrigated)· month 5 of about 6: walk your field twice a week. The cheapest pest control in the world is your own eyes and fingers.
Cotton· month 6 of about 7: diseases, stage by stage. Cotton's own worst diseases are overwhelmingly soil-borne vascular wilts or whitefly-transmitted, and genetic resistance and clean, rotated land are this guide's strongest real defences against both.
Rice (wet-season rice)· month 4 of about 5: weeds and feeding. The first month decides everything. Pull weeds early, feed the crop if you can.
Sorghum· month 3 of about 5: weeds and feeding. Weed early. In dry country a weed is not just stealing food, it is stealing water.
Millet (pearl millet)· month 3 of about 4: insect pests, stage by stage. Shoot fly matters most in young pearl millet, killing the growing point of a seedling before it can recover. Stem borers matter across both crops later in the season, tunnelling inside the stem itself.
Groundnut· month 3 of about 4: diseases, stage by stage. Two leaf spots and one virus take most of the world's lost groundnut. All three are fought mainly before you plant, not after.
Cotton· month 4 of about 6: manage vegetative growth through squaring and flowering. Watch plant height and vegetative vigour through squaring and flowering, since cotton left to grow too tall or too leafy genuinely sheds fruit and becomes harder to manage and harvest.
Soybean· month 3 of about 4: flowering and the pod-set window. Watch the crop move into flowering and understand that this window, roughly stages R1 through R3 in the real staging system agronomists use, is when a water shortage costs the most yield of the entire season.
Pigeon pea· month 3 of about 7: water. Most pigeon pea is grown without irrigation and lives on what the deep roots can find, and the two things that matter are getting water away and, if you can water at all, watering at flowering.
Wheat· month 4 of about 7: weeds and feeding. Weed early. A thick, even, well fed crop does most of the weeding for you.
Barley· month 3 of about 6: water. Barley fears wet feet more than drought, but it needs reliable moisture at two real moments: stem extension and grain fill. Wet weather right at flowering is also when Fusarium head blight gets its chance.
Rapeseed· month 5 of about 7: flowering, bees and pests. The field turns yellow for several weeks, and this is when it is most valuable, most visited by bees and most watched for pests.
Garlic· month 5 of about 8: water steadily, then stop on purpose. Garlic wants even moisture while it is growing leaves, and dry ground while it finishes.
South-western and southern Australia, the Western Cape, central Chile · winter
Sow and plant now
Planning month: next sowing starts in September. Order seed, service machinery and test your soil.
Growing: manage and protect
Wheat· month 5 of about 7: watch for rust. Walk the field once a week from stem growth onward and look at the leaves.
Barley· month 4 of about 6: insect pests, stage by stage. The insect that matters most in barley is not the one that eats the most leaf. It is the aphid that carries a virus, and the best control is often watching, not spraying.
Rapeseed· month 5 of about 7: flowering, bees and pests. The field turns yellow for several weeks, and this is when it is most valuable, most visited by bees and most watched for pests.
Lupin· month 5 of about 7: flowering and pod set. Lupin flowers up a tall spike and then keeps going on side branches, so the crop ripens unevenly from the bottom up.
Faba bean· month 5 of about 7: check the growing tips for black bean aphid. Black bean aphid colonies start at the very tip of the plant and build fast from early summer. Look at the tips every week.
Chickpea· month 4 of about 7: weed the short, open canopy early. Chickpea's short, open canopy closes late, so weeds get weeks of light. Control them early. Saskatchewan advises against rolling after emergence, which can spread Ascochyta and bruise the stiff young stems.
Lentil· month 4 of about 7: weeds. Weed hardest in this crop's own early weeks, since its own low, slow-closing canopy leaves the ground open longer than a taller legume.
A calendar for your own farm. The Laisha app turns your crop and sowing date into a stage-by-stage calendar with weather and pest warnings for where you are.